Changing from 12V to 24V Trolling Motor wires. You will find a motorboat I recently bought that had manufacturing plant 12V 8 determine wiring and connect at the start

Changing from 12V to 24V Trolling Motor wires. You will find a motorboat I recently bought that had manufacturing plant 12V 8 determine wiring and connect at the start

  • Jul 8, 2015
  • # 1
  • chevync20

    Twelve Tip

    We have a motorboat I recently purchased which had manufacturer 12V 8 measure wiring and plug at the start. My personal real question is, i do want to manage a Minn Kota Powerdrive V2 70 pound 24V motor, but want to revise every thing to 24. I am aware simple tips to wire batteries in parallel and show, but have to know everything I must change. By wiring right up in series to 24V, are two line sufficient for the connect? Does a 24V trolling engine has 4 cable? I have possessed 12V engines before, but never ever any 24V configurations. Anyone who can point me personally in the proper course, i’d greatly be thankful.

    The 70 pound 24V draws a max of 42 amps, therefore I thought the 8 measure wiring is adequate. Any simple to follow website links could well be valued. We read some with just two cable and some with three and four. Would like to be sure I get every thing bought and ready for if the motor arrives. Thank you once more

    • Jul 8, 2015
  • #2
  • Eric Revo

    Old Mossy Horns
    • Jul 8, 2015
  • number 3
  • Dan in NC

    Six Tip
    • Jul 8, 2015
  • number 4
  • catfishrus

    Twelve Tip
    • Jul 8, 2015
  • # 5
  • chevync20

    Twelve Tip
    • Jul 8, 2015
  • # 6
  • Eric Revo

    Old Mossy Horns
    • Jul 8, 2015
  • no. 7
  • sky hawk

    Old Mossy Horns

    As mentioned, 24v will extract considerably amps than 12v. Therefore if the wiring is adequate for 12v, it should be sufficient your 24v.

    The actual only real exception to this rule being if you go the area for the batteries while increasing the exact distance. Range makes a difference. Or even, and you are clearly only changing completely, cannot make an effort altering the wires.

    • Jul 8, 2015
  • #8
  • chevync20

    Twelve Pointer
    • Jul 8, 2015
  • number 9
  • Mr.Gadget

    Old Mossy Horns
    • Jul 8, 2015
  • #10
  • Mr.Gadget

    Old Mossy Horns

    As mentioned, 24v will draw much less amps than 12v. Continuar leyendo “Changing from 12V to 24V Trolling Motor wires. You will find a motorboat I recently bought that had manufacturing plant 12V 8 determine wiring and connect at the start”